Supported panel
Run Tesserae on the PaperS3.
The M5Stack PaperS3 is an e-paper panel at 540×960 · 4.7" 16-grey. Tesserae drives it with open-source firmware you flash straight from this browser, then you compose dashboards and push them over the air. Self-hosted, no accounts, no cloud.
Flash this panelOpens the flasher with the PaperS3 already selected.
NEXUS · HOME.OS09:22
17.1°Melbourne · partly cloudy
THU16°FRI14°SAT19°
CO₂612
POWER1.2kW
NEXT08:40
- Status
- VerifiedConfirmed working on real hardware.
- Vendor
- M5Stack
- Panel
- 540×960 · 4.7" 16-grey
- Firmware
- Tesserae open-source, flashed over Web Serial
- Toolchain
- None. It flashes in the browser (Chrome or Edge, desktop)
Verified on real hardware; the sixteen grey levels come from a measured waveform in the firmware. Touch is not enabled yet. Discontinued; for existing owners.
Getting it running
- Plug the panel into this computer with a data-capable USB-C cable.
- Open the flasher with the PaperS3 preselected, pick a build, and write it. The panel restarts on its own.
- Point it at your Tesserae server, compose a dashboard in the browser, and push it to the panel.