Supported panel
Run Tesserae on the 10.85" e-Paper HAT+ (G) on an ESP32-S3 Zero.
The Waveshare 10.85" e-Paper HAT+ (G) on an ESP32-S3 Zero is an e-paper panel at 1360×480 · 10.85" four-colour (black/white/yellow/red). Tesserae drives it with open-source firmware you flash straight from this browser, then you compose dashboards and push them over the air. Self-hosted, no accounts, no cloud.
Flash this panelOpens the flasher with the 10.85" e-Paper HAT+ (G) on an ESP32-S3 Zero already selected.
NEXUS · HOME.OS09:22
17.1°Melbourne · partly cloudy
THU16°FRI14°SAT19°
CO₂612
POWER1.2kW
NEXT08:40
- Status
- VerifiedConfirmed working on real hardware.
- Vendor
- Waveshare
- Panel
- 1360×480 · 10.85" four-colour (black/white/yellow/red)
- Firmware
- Tesserae open-source, flashed over Web Serial
- Toolchain
- None. It flashes in the browser (Chrome or Edge, desktop)
Wire the HAT to a Waveshare ESP32-S3 Zero: SCLK=GPIO12, MOSI=GPIO11, CS_M=GPIO10, CS_S=GPIO9, DC=GPIO8, RST=GPIO7, BUSY=GPIO6, PWR=GPIO5. This is a no-solder pin map and differs from Waveshare's own ESP32-S3 demo wiring.
Getting it running
- Plug the panel into this computer with a data-capable USB-C cable.
- Open the flasher with the 10.85" e-Paper HAT+ (G) on an ESP32-S3 Zero preselected, pick a build, and write it. The panel restarts on its own.
- Point it at your Tesserae server, compose a dashboard in the browser, and push it to the panel.